V
E R I P R O X
P
A R A M E T E R S
Page 44
© 1999 Biometric Identification, Inc.
Host Port and Aux Port Baud Rates
You can change the baud rates of both the Host and Aux ports to match your PC
and/or other networked devices.
In order to maintain communication, if you change the baud rate on the port you
are using, the PC’s baud rate automatically will update.
1
In the appropriate section (
Host Port
or
Aux Port
), select the appropriate
baud rate from the drop down list.
2
Click the Set button.
If the display in the lower right corner does not update, close and re-open the
window.
Host Port Protocol
The usual protocol settings are as follows:
RS-232
stand alone devices
RS-485
networked devices
1
In the
Host Port Protocol
section, select the appropriate protocol from the
drop down list.
2
Click the Set button.
If the display in the lower right corner does not update, close and re-open the
window.
Note:
If you change this while talking over the Host Port, you will lose
communication with the unit(s).