Page 9 v3.01.22
As a last step to set up,
plug the AC power
adapter into the back of
your microscope.
You will note a Velcro strap on the power
cord, you can use this and other Velcro
straps to tidy up the cords behind the
microscope and from the camera.
It’s always a good idea to plug your system into a surge protected AC power
strip. When you are not using your system you can simply switch off the power
strip. In addition, when not using your microscope, you can put a cover on it to
keep the dust off. When using a plastic cover, just pop it over the whole scope
leaving some room for air to get in the bottom so you don’t lock in any moisture.
Assembled system.
Video only system & with a view screen.
