Page 6 v3.01.22
Mount the
Camera
The set screw to
hold the camera
assembly in place
points to the back
on the port itself.
The video camera is pre-mounted on a
microscope optical coupling lens.
You will note two set screws, marked
FOCUS and LOCK.
This is for
parfocal adjustment
. These
are preset before shipping.
Parfocal means when you have a focus
on your microscope (as viewed through
the right eyepiece ocular) your video
image will also be focused.
If your monitor is not in focus with your
right eyepiece scope view, you can
correct the video focus by loosening the
lock screw, adjusting the focus screw
which will focus the video on the monitor,
and then re-tightening the lock screw to
hold it in place.
