Settings:
You are suggested to set to a new password before using the this device with administrator
function
Administrator function: Long pressing key “M” for 6 seconds, displaying default password “0000”,
Press Key “M” again to set the new passwords. Key “+/-“ is for Increasing and decreasing
the value, key “M” is for positioning
(Notes: please make sure to remember the new
passwords)
1. Alarm temperature setting: Press key “M” one time, the display will show 1. 37.5, meaning
the default high temperature value is 37.5
℃
, press key “+/-“ to adjust the target high
temperature
2. Temperature compensation value setting: Press key “M” twice, the display will show 2. 0.0,
press key “+/-“ to adjust the value (adjust value unit is 0.1
℃
)
3. Alarm switch off setting: Press key “M” the third time, the display will show 3. ON, press key
“+/-“ to switch off or switch on the alarm
4. Interval time setting: Press key “M” the fourth time, the display will show 4. 5, key “+/-“ to
adjust value of interval time (interval time available between 3s ~ 90s)
5. Passwords change setting: Press key “M” the fifth time, the display will show 5 PC, key
“+/-“ to adjust value of passwords, Key “+/-“ is for Increasing and decreasing the value, key
“M” is for positioning
(Notes: please make sure to remember the new passwords)
6. Exit setting: Press key “M” the sixth time to exit the setting
BM-TDA
connection diagram
www.biomaxsecurity.com
