Configuring Ethernet Settings
IS1001 Reader User Manual
27
Configuring Ethernet Module Settings
Important!
Only experienced and qualified network administrators should attempt to modify any
of the IS1001 reader
’s Ethernet configuration settings.
1. In the left-hand pane, select the IS1001 reader
’s XPort module by clicking on its IP address.
2. In the right-hand pane, select the
Web Configuration
tab.
The IS1001 reader
’s IP address is displayed at the top.
3. To the right of the IP address, click on the green arrow.
4. In the
Windows Security
dialog, click on the
OK
button without providing a user name or
password. Credentials have not been set by the manufacturer and are not required.
The IS1001 reader
’s configurable settings are displayed within the Lantronix DeviceInstaller
browser.
5. Use the browser interface to modify the desired settings.
6. Once the settings are modified click on the
Apply Settings
to save the new configuration.
This will restart the XPort module.
7. After the XPort module restarted verify that the new settings have been applied.
Important!
Make sure the XPort
module’s Serial Settings match the IS1001 reader’s Remote Port
settings. The IS1001 reader
’s Remote Port speed is fixed to 115200.