HPR Lite User Manual
6
1.7 Updating Reader Firmware
New or updated firmware may periodically become available for the HPR Lite reader. You can
check Biomark’s web site to see if an update is available. The easiest way to update the
firmware is through the Biomark Tag Manager or BioTerm communication software. Biomark
Tag Manager requires a product key to run, which is included with each purchase of the reader
(1 PC installation only). Please contact the Customer Service Department at Biomark to obtain
the key by c1 (208) 275-0011 or emailing [email protected].
To check for availability of a firmware update or to download Biomark Tag Manager or BioTerm
software please go to corresponding product at
https://www.biomark.com/software-drivers
.
Please refer to corresponding software’s User Manual (see link below) for the reader’s firmware
update procedure.
•
Tag Manager:
https://www.biomark.com/technical/PDFs/Tag%20Manager%203%20User%20Manual.p
•
BioTerm:
https://www.biomark.com/pub/media/BioTerm_and_BioStat_User_Manual_Rev2_1.pdf
Refer to section
5. Communicating with the Reader
for more information on how to establish
reader’s communication with a PC.
Note:
As a precaution, you should download all tag IDs contained in memory before initiating
the update process. All settings may be reset to manufacturer default values during the update
process, so it is recommended that you take a note of the present settings prior to updating the
reader.
