Biomarine BioPak 240R Revolution, Benchman Manual, Page: 35 / 48

BioPak 240R Benchman Manual
A47D257, Revision K
Page 35 of 48
7.9 Pneumatic Assembly
ITEM # QTY. PART NUMBER DESCRIPTION
REF 1 --- Pneumatic Assembly
1 1 B6-02-5002-31-0 Bypass Feed Tube
2 1 B6-02-5002-32-0 Bypass Return Tube
3 1 B6-02-5002-30-0 Oxygen Feed Tube
4 1 B6-02-5002-03-1 Constant Add Center Section Feed Tube
5 1 B6-02-5002-02-1 Demand Add Center Section Feed Tube
6 1 B4-04-5000-00-0 Bypass Valve Push Button
7 1 B4-04-5570-00-0 Bypass Valve
8 1 B6-02-5002-00-1 Manifold Assembly, See Section 7.10
9 1 B6-02-5002-26-1 Oxygen Regulator Assembly
1
10 1 B6-02-5002-43-0 Remote Gauge Shut Off Valve Assembly
11a 1 B6-02-5002-45-4 Remote Gauge Assembly-bar
11b 1 B6-02-5002-45-0 Remote Gauge Assembly-psi/bar
12 1 B6-02-5002-44-0 Remote Gauge Feed Tube Assembly
13 1 B4-04-0030-00-0 Cylinder Seal Washer
14 1 B2-02-3300-14-0 Bypass Valve Spring
2
15 1 B4-04-7070-02-1 Constant Add Tube O-Ring
3
16 1 B4-04-7070-00-1 Demand Add Tube O-Ring
3
Note:
1. Oxygen Regulator, Item 9, is supplied as a complete assembly only. Regulator will mount to BioPak lower
housing with two #8 x 3/8” Self-Tapping Screws, B3-01-4071-00-0
2. Bypass valve spring, item 14, is to install between the bypass valve and the bypass valve push button. Spring
shall seat around the actuator stem of the bypass valve.
3. Indicated components require lubrication with Christo-Lube O-Ring Lubricant, B5-01-3000-01-0, prior to
installation.