BIOLAN POPULETT 200, Instructions For Installation, Use And Maintenance Manual

Page: 4 / 12

EN-2
EN
Com-
ponent
Part name Number Material
1 pipe cap 18780250 PE
2 ventilation pipe with sleeve Ø 110 x 3.4 - 1000 mm 28780120 PE
3 sliding sleeve 18780200 PE
4 thermal seat Pehvakka 70578500 EPP
5 inlet air valve body and 18792901 PP
6 inlet air valve cover PE
7 top (Populett 200 / 300) 17780020 PE
8 separating flap 200 x 220 mm 18780090 PVC - soft- 50
9 separating net 200 x 220 mm 18780110 PE
10 convex sticker Biolan 27710360 PE
11 locking rubber for the top 19734110 EPDM
12 locking rubber washer 18726140 PE
13 locking rubber screw 20010012 ZN
14 flexible liquid pipe, black 32 mm 28578010 PE
15 lead-through rubber 30/40 19780050 EPDM
16 transport wheels 29780923 RST+PP+EPDM
17 retainer clip, with cap 20700004 ZN
18 tank 200 (Populett 200) 17780010 PE
19 tank 300 (Populett 300) 17782010 PE
Accessory
20
Cover for replacement tank 17780190 PE
In addition to the components illustrated in the component drawing, Populett 200 and 300 also include:
Compost and Toilet Bulking Material, 40 l 70562100 package PE
intermediate bottom plate 17780030 PE
holder strap for intermediate bottom 700 x 30 mm 20780040 nylon
Populett 200, separating pipe Ø 75 x 2.7 - 550 mm 28780080 PE
Populett 300, separating pipe Ø 75 x 2.7 - 890 mm 28710240 PE
holder strap for liquid pipe 200 x 30 mm 20780100 nylon
template 27780170 paper
user manual Finnish/Swedish 27780180 paper
user manual in 10 languages (export products only) 27780190 paper
Compostmixer 70575200
In addition to the components illustrated in the component drawing, Populett 300 also includes:
Wind Fan 70572500
Component list
1. Planning and installation
When locating the Biolan Populett, provide sufficient space for use and
maintenance of the toilet, for installation of the toilet through the wall of
the toilet building, and for routing of the ventilation pipe. How the seep
liquid or the seep liquid and urine shall be conducted into the tank or rel-
evant treatment facility also needs to be taken into account. The unit can
be placed directly on sufficiently firm ground. Before building the toilet,
plan the access route required for maintenance behind the toilet and for
the post-composting procedure.
You can install the Populett in an existing toilet building taking into ac-
count that the structure of the building must be modified in order to en -
able correct positioning of the toilet unit. When planning a new toilet
building, take into account the space requirement of the unit. See the
dimension drawing.
1.1 Technical specifications
• depth of the seat part inside the toilet building about 55 cm
• width of the seat part inside the toilet building about 89 cm
• height of the seat part 51 cm
• overall height: Populett 200 93.5 cm, Populett 300 128.5 cm
• volume of the tank: Populett 200 about 200 l, Populett 300 about
300 l
• weight: Populett 200 about 27 kg, Populett 300 about 30 kg
• external diameter of the liquid pipe 32 mm
• external diameter of the ventilation pipe 110 mm, length about 230
cm
1.2 Placing in the toilet space
Install the Biolan Populett through the wall and the floor so that the top
of the tank (part 7) will serve as the seat ring. The body, which serves as
a tank for the toilet waste, is supported on the ground and at the same
time it supports the seat part. The distance from the toilet floor to the
ground surface must be 37 cm for Populett 200, and 71.5 cm for Popu -
lett 300. Thus the toilet unit will be supported both by the ground and the
edge of the toilet floor.
Make a smooth and durable bed for the toilet unit, such as, for exam
-
ple, a gravel bed, covered by film-faced plywood or a concreted bottom
structure.
While creating the openings and bottom structure of the building, put the
toilet unit occasionally in place so as to find out where the openings still
need to be reworked. Using the sawing template and the dimensions
provided as an aid, saw a suitable opening for the toilet in the floor and
in the wall. Depending on the manufacturing technique, the size and
shape of the tank vary slightly. This means that you may have to enlarge
the hole a bit or the seam of the floor and the tank will not be completely
tight. Avoid, however, making the openings too large, because a too
wide chink between the toilet building and the toilet unit is not a good
thing. Cover the space between the rear wall of the toilet building and
the toilet unit with a strip (Fig.1).
Put the Populett in place without the wheels and shaft. Put the transport
wheels (part 15) in place only for moving the toilet unit.