GeneExplorer Thermal Cycler Operation Manual
Chapter Four Operation Instructions
－
14
－
Run mode: Standard Mode and High-speed Mode.
Standard Mode running characteristics simulate BIOER TOUCH series.
2.3 Function of loop
On the interface of PCR program setting, click “
Loop
”, and it will prompt interface 1-1, select
the starting and ending sections of the loop, click “Determine” and it will prompt the setting box
1-2 for loop times, input the times and click “OK”, the setting of loop section will be finished.
Attention:
In one program, multiple loop sections can be set, but these sections cannot
be crossed, but only paralleled or included.
