biodex 950-440-K900 Manual Download Page 2

Page: 2 / 4

— 2 —

This manual covers installation procedures for the following product:

950-440-K900 Retrofit Kit, Balance System SD 12.1" LCD Display

This product can be used with the following products:

950-300

BALANCE SYSTEM SD, 115V

950-302

BALANCE SYSTEM SD, 230V

950-304

BALANCE SYSTEM SD, 100V

BALANCE SD DISPLAY UPGRADE PROCEDURE

TOOLS NEEDED:

PHILLIPS HEAD SCREWDRIVER, 7/16 IN. WRENCH

PARTS NEEDED:

RETROFIT KIT P/N 950-440-K900

1. Turn off display and unplug unit from A/C outlet.

2. Remove the existing display from the pivot bracket by removing the (4) Phillips head screws

and disconnecting the display cables @ connectors P2, J7 and J11 located at the back of the
display.

3. Using a 7/16 in. wrench remove the acorn nut and threaded rod that secures the pivot brack-

et to the display tube assembly and then remove the existing pivot bracket.

BALANCE SYSTEM SD DISPLAY

Pivot Bracket

Serial Cable P2

Display Cable to J11 &
Tilt Sensor cable to J7

Acorn Nut & Threaded Rod

Summary of Contents for 950-440-K900

Page 1: ...RETROFIT KIT FOR BALANCE SYSTEM SD DISPLAY 950 440 K900 BIODEX Biodex Medical Systems Inc 20 Ramsay Road Shirley New Y ork 11967 4704 Tel 800 224 6339 Int l 631 924 9000 Fax 631 924 9338 Email info bi...

Page 2: ...RTS NEEDED RETROFIT KIT P N 950 440 K900 1 Turn off display and unplug unit from A C outlet 2 Remove the existing display from the pivot bracket by removing the 4 Phillips head screws and disconnectin...

Page 3: ...display and tilt sensor cable J11 from original display to the new 12 in display and attach the display to the pivot bracket using the 4 10 32 x 38 Phillips head screws that are included with the ret...

Page 4: ...display 3 Touch UTILITIES on the screen Note The next step requires pressing the hidden keypads in the upper right and left corners of the display s touch screen 4 Touch Top Right Corner Top Left Cor...