14
System Site Checkout
1.
Unpack and assemble system. Check for physical damage or cosmetic defects.
Comments:
2.
In "setup" use knee accessory and set the range limits maximum (total ROM-
degrees is between 149-152).
Comments:
3.
While in "Passive" mode, test percent ROM controls, cushion and the pause
controls.
Comments:
4.
While in the "Passive" mode, check speeds and torque limits.
Comments:
5.
Test both comfort stops (on the dynamometer and hand held), pauses (both on the
dynamometer and hand held), and rotate buttons on the dynamometer.
Comments:
6.
In the "reactive eccentric" mode, check speeds and torque limits.
Comments:
7.
In the "isokinetic" mode, check speeds, concentric and eccentric contractions, and
torque limits.
Comments:
8.
In the "isometric" mode, check auto positioning from the dynamometer and
computer.
Comments:
9.
In the "isotonic" mode, check torque's, concentric and eccentric contractions.
Comments:
10.
Enter new patient into computer
Comments:
11.
Run a simple test to ensure proper computer control
Comments:
12.
Print reports
Comments:
13.
Check attachments to ensure correct operation
Comments: