8
Biodex Medical Systems, Inc. © 2017
Connecting an Optional Report Printer:
•
Place the USB end of Cable 8 into the Interface Module as illustrated in the circular inset
at the top right of Figure 6 and the other end into the Report Printer as illustrated in the
circular inset at the top left of Figure 6.
•
Connect the two sections of Cable 9 by plugging the cable into the power transformer.
Place the power connector end of Cable 9 into the Report Printer as illustrated in the
circular inset at the top left of Figure 6 and the other end into the power strip.
Figure 6. Atomlab 500 – Connection to a Report Printer
•
Proceed to Page 15.
