- 3 -
INTRODUCTION
The Ultra Pro Ultrasound Table is a dedicated table for
all general ultrasound procedures including OB/GYN.
Choose from an assortment of table options to cus-
tomize the table to suit your department needs.
This extra-wide table features a 500-lb patient load
capacity, contoured tabletop to maximize patient scan-
ning, and a vast height range down to 23" to facilitate
wheelchair transfers. The Ultra Pro also accommodates
bariatric patients.
Ergonomically designed to suit both patient and sonograph-
er, the table’s height range allows seated or standing work
positions. Pivoting side rails allow comfortable shoulder,
arm and hand positions when scanning. There are no barri-
ers between sonographer and patient, allowing correct
scanning posture to prevent musculoskeletal injury. The
open frame design allows sonographers to get closer to the
patient for carotid imaging or long leg arterial scanning.
The motorized Fowler back is infinitely adjustable up to 80°
via the hand or optional foot controller.
For the patient, comfort is assured through lengthy proce-
dures with an amply thick mattress and a multitude of com-
fort-driven design details. For example, the retractable stir-
rups pivot from side-to-side and can be used partially or
fully extended while the foot cushion drops down to 40° for
patients with circulatory issues and 80° for stirrup access.
Biodex tables are so accommodating, they actually reduce
the total amount of time required to get a quality image.
The Ultra Pro Ultrasound Table is equipped with a motor-
controlled hand controller to actuate table positions, 2"- and
3"-thick table padding covered in easy-to-clean
Naugahyde
®
, two patient restraining straps with Velcro
®
hook and loop fasteners, five-inch swivel casters and a
central locking system, accessible from either side of the
table, to secure table position.
Additional accessories are available, including foot con-
troller, retractable stirrups, vascular scanning arm board,
pivoting side rails, IV pole and paper dispenser.
TABLE PARTS AND ADJUSTMENTS
(Refer to Figure 1.)
Figure 1. The Biodex Ultra Pro Ultrasound Table parts and
adjustment include:
Standard Parts and Adjustments:
1. Fowler Back
2. Seat Cushion
3. Foot Cushion
4. Foot Cushion Release Lever
5. Patient Ankle Restraints
6. 5" Swivel Casters
7. Central Locking System Lever
8. Hand-Held Controller
9. Patient Restraining Straps
Optional Parts and Adjustments:
A. Paper Dispenser (058-610)
B. Pivoting Side Rails (058-631)
C. Retractable Stirrups (058-651)
D. Foot Controller (058-740)
E. Side Rail Pull Pin
F. Vascular Scanning Arm Board Receiving Tube
G. Vascular Scanning Arm Board, not shown (058-735)
H. IV Rod, not shown (058-656)
A
1
B
2
F
9
E
8
7
D
6
5
4
3
C
