24
7.10 Other remarks on use
1) Disconnecting from the turbine hose
(a) Detach the handpiece according to the instruction manual
of your coupling.
* When reconnecting, clean the coupling on your turbine hose
and inside of chamber unit’s joint in advance referring to
“7.5 1) Cleaning of coupling”.
2) Detaching head
(a) The head must be attached or detached when polisher is not
connected to a turbine hose. If polisher is connected to a
turbine hose, disconnect it from the turbine hose.
(b) Turn the head in the direction of the arrow in the illustration
and detach.
(c) When reattaching, clean the head and inside of chamber
unit’s coupling in advance referring to “7.3 Attaching head”.
3) Detaching powder cap
(a) The powder cap must be attached or detached when polisher
is not connected to a turbine hose. If polisher is connected
to a turbine hose, disconnect it from the turbine hose.
(b) Hold polisher keeping the powder cap downward. Turn the
powder cap in the direction of the arrow in the illustration
to detach. Detach the powder cap above your cuspidor, as
the powder in the powder chamber may scatter when the
powder cap is released.
(c) Discard the leftover powder in the powder cap.
(d) When refi lling the powder and reattaching the powder cap,
clean the inside of powder chamber and powder cap
referring to “7.7 Powder fi lling”.
Powder cap
downward and
unfix. Discard the
leftover powder.
24
7.10 Other remarks on use
1) Disconnecting from the turbine hose
(a) Detach the handpiece according to the instruction manual
of your coupling.
* When reconnecting, clean the coupling on your turbine hose
and inside of chamber unit’s joint in advance referring to
“7.5 1) Cleaning of coupling”.
2) Detaching head
(a) The head must be attached or detached when polisher is not
connected to a turbine hose. If polisher is connected to a
turbine hose, disconnect it from the turbine hose.
(b) Turn the head in the direction of the arrow in the illustration
and detach.
(c) When reattaching, clean the head and inside of chamber
unit’s coupling in advance referring to “7.3 Attaching head”.
3) Detaching powder cap
(a) The powder cap must be attached or detached when polisher
is not connected to a turbine hose. If polisher is connected
to a turbine hose, disconnect it from the turbine hose.
(b) Hold polisher keeping the powder cap downward. Turn the
powder cap in the direction of the arrow in the illustration
to detach. Detach the powder cap above your cuspidor, as
the powder in the powder chamber may scatter when the
powder cap is released.
(c) Discard the leftover powder in the powder cap.
(d) When refi lling the powder and reattaching the powder cap,
clean the inside of powder chamber and powder cap
referring to “7.7 Powder fi lling”.
Powder cap
downward and
unfix. Discard the
leftover powder.
