10
7.3 Attaching head
1) Polisher must be disconnected from a turbine
hose of dental unit when attaching and
detaching the head. If it is connected,
disconnect from the turbine hose fi rst.
2) Confi rm the o-ring of the head is not
damaged.
3) If water, oil, or powder adheres to head or
inside the chamber unit’s coupling, wipe off
with a cotton swab or dry cloth.
4) Align the head to the thread of the chamber
unit’s coupling, turn the head in the direction
of the arrow in the illustration until it stops.
Confi rm secure attachment.
Remove water,
oil, and powder.
Confirm the o-ring of the head
is not damaged.
10
7.3 Attaching head
1) Polisher must be disconnected from a turbine
hose of dental unit when attaching and
detaching the head. If it is connected,
disconnect from the turbine hose fi rst.
2) Confi rm the o-ring of the head is not
damaged.
3) If water, oil, or powder adheres to head or
inside the chamber unit’s coupling, wipe off
with a cotton swab or dry cloth.
4) Align the head to the thread of the chamber
unit’s coupling, turn the head in the direction
of the arrow in the illustration until it stops.
Confi rm secure attachment.
Remove water,
oil, and powder.
Confirm the o-ring of the head
is not damaged.
