background image

1

Dear 

 DIAVUE ToGo

 System Owner:

Thank you for purchasing the DIAVUE ToGo Blood Glucose Monitoring System.

This  manual provides important information to help you to use the system 

properly. Before using this product, please read the following contents 

thoroughly and carefully. 

Regular monitoring of your blood glucose levels can help you and your 

doctor gain better control of your diabetes. Due to its compact size and easy 

operation, you can use the DIAVUE ToGo  Blood Glucose Monitoring System to 

easily monitor your blood glucose levels by yourself  anywhere, any time.

If you have other questions regarding this product, please contact the local 

customer service or place of purchase.

Intended Use

This system is intended for use outside the body (in vitro diagnostic use) by 

people  with  diabetes  at  home  and  by  health  care  professionals  in  clinical 

settings as an aid to monitoring the eff ectiveness of diabetes control. It is

intended to be used for the quantitative measurement of glucose (sugar) in 

fresh whole blood samples from the fi nger, palm, forearm and upper arm. 

It should not be used for the diagnosis of diabetes, or testing on newborns.

Professionals may test with capillary and venous blood sample; home use is 

limited to capillary whole blood testing.

Version 2.0 2015/07

Summary of Contents for DIAVUE ToGo































Reviews: