9
Congratulations! You have completed all settings!
THE FOUR MEASURING MODES
The meter provides you with four modes for measuring, General, AC,
PC and QC. You can switch between each mode by:
1. Start with the meter switched off . Insert a test strip to turn on the
meter. The screen will display a fl ashing “
“ and “Gen”.
2. Press
M
to switch between General, AC, PC and QC mode.
BEFORE TESTING
Control Solution Testing
Our Control Solution contains a known amount of glucose that reacts
with test strips and is used to ensure your meter and test strips are
working together correctly.
Do a control solution test when :
•
you fi rst receive the meter,
•
at least once a week to routinely check the meter and test strips,
•
you begin using a new vial of test strips,
•
you suspect the meter or test strips are not working properly,
•
your blood glucose test results are not consistent with how you
feel,or if you think the results are not accurate,
•
practicing the testing process, or
•
you have dropped or think you may have damaged the meter.
NOTE :
•
These parameters can ONLY be changed in the setting mode.
•
If the meter is idle for 3 minutes during the setting mode, it will switch of f
automatically.
