5
How to Use
Seat Temperature Control
Energy Saving Fuction
Nozzle Cleaning
More than 3 Seconds
When selecting Nozzle Cleaning while not seated,
the nozzle cleans itself 3 times. Then nozzle extends
and stop for manual cleaning process.
Clean the nozzle with a brush and press STOP button
after completion of manual cleaning.
Then nozzle cleans itself for 3 times and retract.
NOZZLE CLEANING will not operate if the seat sensor
is activated.
Water Temperature Control
Water temperature is adjustable. (4 levels)
(Off - Low - Middle - High)
Sitz Bath
Wash or Bidet is switched to Wash Sitz Bath or Bidet
Sitz Bath if Nozzle Cleaning button is selected during
Wash or Bidet operation.
Water pressure is switched to 1st level regardless preset
water pressure setting and Sitz Bath operates for
5 minutes.
LED of Nozzle Cleaning turns on during the operation
of Sitz Bath.
Select the Nozzle Cleaning again to swith to normal
Wash or Bidet.
Seat Sensor Release
The seat sensor can be activated and deactivated by
pressing Pluse button for 3 seconds.
If the seat sensor is deactiavted, the unit works
without occupying the seat and features* cannot
be controlled.
Night Light
Blue LED night light provides enough brightness to
see the toilet without turning on the bathroom light.
Night light can be turned on and off by pressing
‘+’ for 3 seconds while not seated.
Night light setting cannot be adjustable if seat
sensor release feature is activated.
Night light, Silence mode, Automatic start deodorizing,
Factory initialization, Power off, Nozzle cleaning.
Seat temperature is adjustable. (4 levels)
(Off - Low - Middle - High)
To reduce the chance of low temperature burns,
the seat has a seat heater auto adjustment function
which turns to low temperature (35 C, 95 F) when
seat is occupied for more than 15 minutes
consecutively.
If the seat is set lower than middle level, the seat
will remain at off or low level.
Automatic energy saving mode
- This mode will be actiavted by pressing the Energy
Saving button until yellow LED lamp lights on.
(Seat and water temperature will be kept at 32 C)
Powerful energy saving mode
- This mode will be activatd by pressing the Energy
Saving button until green LED lamp lights on.
(Seat and water heater will be kept off)
Release of energy saving mode
- Press the Energy Saving button until LED lamp turns off.
When the unit is occupied, it adjusts to the preset
temperature and it returns to the saving mode when seat
is unoccupied.
If the seat and water temperature are off, they will
remain off.
* Features
