http://www.BioAxxis.com
BioAxxis® BD1
24
The sliding cover is
fully lifted to power
on without any
fingerprint enrolled
inside, the deadbolt
does not disengage or
four alert beeps are
heard.
1.
Right & left hand
door configurations
is set incorrectly;
2.
The tail piece was
not set properly
1.
Correctly configure the
unit for left or right
hand door swing per
section 4.5.
2.
Uninstall the outdoor
unit and keep the UP
sign side of the tail
piece up and insert the
tail vertically through
the cross slot of the
deadbolt while the turn
knob is in vertical
position.
When the sliding
cover is fully lifted
and immediately put
down to engage the
deadbolt, but the
deadbolt does not
fully engage, or four
alert beeps are heard.
1.
Improper
positioning of the
strike and strike
lining box. It may
be deflecting the
deadbolt.
1.
Check the position of
the strike and the strike
lining box.
When the sliding
cover is lifted up
during daily use,
nothing happens
(fingerprint scanner
does not blink)
1.
Batteries not
inserted correctly;
2.
Wires not
connected properly
1.
Remove & reinsert the
batteries following “+”
and “—“ signs in the
battery house.
2.
Check the connections
and make sure wires
are fully plugged in.
Six beeps are heard
when any function is
performed.
Low Voltage
Change the batteries