This appliance has a polarized plug (one blade is wider than the other). If the
plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact
a qualified electrician. Do not attempt to defeat this safety feature.
If this unit shuts itself off, first press the reset button on the
APPLIANCE LEAKAGE
CIRCUIT INTERRUPTER (ALCI).
Periodically check the safety plug to verify it is
in proper working order. Plug the appliance in an electrical outlet and press the
test button. The dryer should stop immediately. To resume operation, press the
reset button.In the event the test button does not work properly, return the
appliance to a service center or the manufacturer.
MAINTENANCE
Keep all vents and openings clear of hair, dirt and dust. The exterior of the dryer
can be wiped clean with a damp cloth only when switched off and unplugged.
Clean filters regularly.
Blocked or clogged air intake vents will cause the dryer to overheat.
If
overheating occurs an automatic safety device will shut off the dryer. If this
occurs, unplug the cord and allow the dryer to cool for 10 to 15 minutes before
starting. Make sure the air vents are clean.
When using electrical appliances, especially when children are present, basic
safety precautions should always be taken, including the following:
READ ALL INSTRUCTIONS BEFORE USING, KEEP AWAY FROM WATER.
DANGER
- As with most electrical appliances, electrical parts are electrically
live even when the switch is off:
• Always unplug dryer immediately after use.
• Do not use dryer while bathing.
• Do not place or store dryer where it can fall or be pulled into a tub or sink.
• Do not place or drop dryer in water, or any other liquids.
• If dryer falls into water, unplug it immediately.
DO NOT REACH INTO THE WATER!
WARNING
- To reduce the risk of burns, electrocution, fire or injury to persons:
• Dryer should never be left unattended when plugged in. Close supervision is
necessary when this appliance is used by on or near children or individuals
with certain disabilities.
• Use this appliance only for its intended use as described in this manual.
DO
NOT USE ATTACHMENTS NOT RECOMMENDED BY THE
MANUFACTURER.
Only use the Bio Ionic Universal Diffuser.
• Never operate this dryer if it has a damaged cord or plug, if it is not
working properly, or if it has been dropped, damaged, or dropped in water.
Return the dryer to a service center for examination and repair.
• Keep the cord away from heated surfaces. Do not pull, twist, or wrap
cord around the dryer.
• Never block the air openings of the appliance or place it on a soft surface,
such as a bed or couch, where the air openings might be blocked. Keep the
air openings free of lint, hair, etc.
• Never use while sleeping.
• Never drop or insert objects into any openings.
• Do not use outdoors or operate where aerosol (spray) products are being
used or where oxygen is being administered.
• Do not direct hot air toward eyes or other heat sensitive areas.
• Attachments may be hot during use. Allow them to cool before handling.
• Do not place dryer on any surface while it is operating.
• While using the appliance keep your hair away from the inlets.
• Do not use with voltage converter.
• Do not use extension cord to operate dryer
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING
:
if any malfunction occurs, do not to attempt to repair it
yourself. This appliance has no user serviceable parts.
CAUTION
:
Never allow the power cord to be pulled, twisted or severly
bent. Never wrap the cord tightly around the dryer. Damage will occur where
the cord enters the dryer, causing to rupture and short. Inspect the cord
frequently for damage. Stop use immediately if damage is visible or unit stops or
operates internittently.
TURN ON:
Press and hold “ON/OFF” button until the light turns on.
ADJUST TEMPERTURE:
Rotate dial to the left to decrease temperature. Rotate
dial to the right to increase temperature.
TURN COOL AIR ON:
While the dryer is on, click the “COOL” button once.
TURN COOL AIR OFF:
While the cool air is on, click the “COOL” button once.
TURN OFF:
Press and hold “ON/OFF” button until the light turns off.
2
PL-748
