After the Microblaster installation has been finished, correctly follow the use
instructions and the other information about precautions and safety, described below.
7. USER INSTRUCTIONS
1
-Remove the switch button clamp (04).
_______
When removing the switch button clamp (04), try using it immediately
_______
afterwards and always after using Microblaster, return the respective
_______
clamp to the button (04) thus keeping it always pressed. The act of
_______
keeping the button clamp released for long periods might generate
_______
adherence of the internal driving tube walls, which might make the oxide
_______
passage difficult.
2
-Microblaster Plus model is provided with two removable and autoclavable
nozzles (02 and 11) offering two options for the ejecting needle angling, one at 90º
(indicated for intraoral works on posterior teeth) and another at 138º (indicated for
laboratory works and intraoral works on anterior teeth). According to the kind of
work to be carried out, fix one of the nozzles on the Microblaster body by means of
the fixing nut (12).
_______
During the nozzles removal or fixation (02 or 11) on Microblaster Plus,
_______
firmly hold the nozzle with the fingers of one hand without turning it and
_______
then turn the connecting nut with the fingers of the other hand (12), thus
_______
fixing or releasing the chosen nozzle by means of the nut thread.
_______
Never use any kind of wrench or tool to fix or release the nozzle on
_______
Microblaster Plus.
Note:
Nozzle (02) used in the Microblaster models allows rotation up to 180º,
facilitating the performance of very different kinds of works.
3
- Fill the tank (06) in to maximum ¾ of its capacity with aluminum oxide and fix it
on the tank for abrasive lid (5) located at the end of the Microblaster body.
_______
Use only abrasives of the type aluminum oxide and with granulations in
_______
the range up to 100 microns.
Note:
Bio-Art commercializes the perfect aluminum oxide for consumption and
refill to be used with Microblaster.
5
