BINZEL-ABICOR BRS-FP, Operating Instructions Manual

Page: 43 / 100

BRS-FP/BRS-FPi 6 Commissioning
BAL.0028 • 2017-03-10 EN - 19
6.5.2 Set of clamping jaws
Each clamping jaw is positioned in the clamp lever using a cylinder bolt Ø 4 x 10 and is secured
using a cylinder head screw M5x16.
Each stationary locating jaw is bolted onto the clamping body using two countersunk screws M5x12.
6.5.3 Mounting the reamer
1 Mount the reamer (2) into the reamer holder.
2 Tighten the reamer (2) (min. 20 Nm).
NOTICE
• Make sure that only clean and dry compressed air is used.
The compressed air must correspond at least to the quality class 4 according to ISO 8573-1.
1 Clamping jaw
2
Stationary locating jaw
3 Cylinder bolt 4 Cylinder head screw
Fig. 11 Set of clamping jaws
1 2
3
4
1 Reamer holder 2 Reamer 3 Tool
Fig. 12 Mounting the reamer
NOTICE
• When changing the reamer, only use tools with a suitable width across flats.
Reamer seat AF 27 mm, reamer AF 17 mm.
1
2
3