Chapter 10 Key functions
On the elmeg hybird, the system telephone provides various performance features that are typical of this system.
For example:
• Dial from the elmeg hybird's phone book (see
Dial from the elmeg hybird's phone book.
on page 62)
• Announcement and simplex operation (see
on page 68 and
on page 69)
• Special function keys (see
on page 25)
Note
The system telephone's LED stati are constantly being updated.
10.1 Function keys
Caution
The function keys can only be set up via the elmeg hybird configuration. You can see the functions of
each key with the system telephone.
The system telephone has 15 function keys that can be assigned with various functions in two layers. Each key has
a two-colour LED that is used to display the keys' active functions. Each colour is assigned to a layer of the function
key.
When you press a function key, the programmed function is run. If an LED display is associated with this function,
the LED is switched on or off accordingly.
You will find a description of setting up function keys in
on page 43.
1. Function key layer = blue LED.
2. Function key layer = white LED.
You get to the second function key layer:
By pressing the key twice. This must be done quickly.
or
You configure the bottom function key as a Switch key via the elmeg hybird configuration. Then the switching
is done only using this key. The second layer's functions are shown by the white LED. If you have pressed one
of the second layer function keys, you will then be back in the first layer and the white LED is switched off.
10.1.1 Switch key
You use the Switch key to switch between the two function key layers. If you have pressed one of the second layer
function keys, you will then be back in the first layer and the white LED is switched off.
LED functions
The key's LED indicates the current status:
LED off:
First layer active.
White LED on:
Second layer active.
bintec elmeg GmbH
10 Key functions
System telephones elmeg S560 / elmeg S530
25