12.4.2 Function keys
Note
The function keys 1 to 15 are in the first layer, with function keys 1a to 15a in the second layer.
Previous steps: Menu -> Settings
Select
*
with the Navigator.
Use the "Right" Navigator to display the next menu for the selected row.
Select the
+%
function with the Navigator. You can see the key assignment for all the
function keys.
Use the OK key to display the next menu for the selected row.
12.4.2.1 View
Previous steps: Menu -> Settings -> Function keys -> View
Use the Navigator to select the function you wish to view.
Use the "Right" Navigator to display the next menu for the selected row.
Use the
softkey or the "Left" Navigator to return to the
*
menu.
Speed dial with function keys
Speed dialling is initiated using the function keys. Under each of these keys you can set up destination dialling in two
layers. If you want to dial a number in the second layer, press the desired key twice. This must be done quickly. If
you have only set up part of the number (e. g. the extension) under the destination dial key, you can dial the rest of
the number now. If the receiver is lifted or hands free is switched on, the number is dialled immediately.
Note
If you have set up a "Switch" key, you can press it and go to the second layer (the white LED lights up
on the Switch key). If you have pressed one of the second layer function keys, you will then be back in
the first layer and the white LED is switched off.
The receiver is hung up.
Press the destination dial key.
If the receiver is lifted or hands free is switched on, the number is dialled immediately.
Lift the receiver. The number is dialed.
Note
If the receiver is hung up, you can press a destination dial key. You are then shown the destination,
and you can use the Navigator to edit the number temporarily.
E. g. the destination dial memory only holds the prefix and you add the rest of the number manually.
bintec elmeg GmbH
12 Menu
System telephones elmeg S560 / elmeg S530
43
