Caution
Do not carry the system telephone by the base. The retainer is not designed to take such a load.
5.3 Adjust the display angle
You can alter the display angle to one of three steps between 0° and about 60°. To do this, you gently pull or press
the frame of the display into the position you want.
5.4 Clean the system telephone
The system telephone has been designed for normal usage conditions. Only clean the device when necessary with a
slightly damp cloth, or use the antistatic cloth supplied. Never use solvents. Never use a dry cloth; the electrostatic
charge could cause electronic faults. Make sure that no moisture can enter the system telephone and cause dam-
age.
5.5 Add label strips
The cover
for the label strips
on the system telephone is put on as shown in the picture. Two hooks are used
to put the cover into the holder for label strips
, and a magnet
is used to secure it on the underside. The el-
meg hybird configuration system can be used to label the label strips and print them out.
System telephone
Holder for label strips
Label strips
Cover
Magnetic clamp for the cover (not visible)
5 System telephone installation
bintec elmeg GmbH
8
System telephones elmeg S560 / elmeg S530
