15.8.2 Redialling: Select person to call
The receiver is hung up.
Press the redial key.
You see the last numbers dialled.
Select the outgoing call.
Lift the receiver, and the party is called.
Note
You can also select the outgoing call by pressing the redial key repeatedly.
15.9 Calls
15.9.1 Accept call
With respect to the system telephone's basic settings, each call shall be signalled irrespective of the system tele-
phone's call number. If two calls are signalled simultaneously, the first call is accepted when the receiver is lifted. The
second call may continue to be signalled by means of the call waiting signal.
A call is signalled.
Now the display shows:
The caller's name or, if not known, number.
The name of the external line.
The name or number of any transferred call.
Lift the receiver.
15.9.2 Reject call
If you are unable to or do not wish to accept a call, you can reject the call. Under
, press the
softkey and the call is no longer signalled on your system telephone. If you are a member of a team, the call will con-
tinue to be signalled on the team's other telephones. If the call was only signalled on your system telephone, the call
gets the "Busy" signal when the call is declined.
A call is signalled, the receiver remains hung up.
Use the
softkey to go to the next menu.
Select
with the Navigator.
Confirm with the OK key.
The call is ended and the caller hears the engaged tone.
You see the system telephone's Idle display once more.
15 Dialling
bintec elmeg GmbH
64
System telephones elmeg S560 / elmeg S530
