BINMASTER DPM-500, Instruction Manual

Page: 36 / 50

DPM-500 Analog Input Meter Instruction Manual
36
Reset Menu (
reset
)
The Reset menu is used to reset the maximum or minimum reading (peak or valley) reached by the
process; both may be reset at the same time by selecting “reset high & low” (
rst HL
). The tare value
used to zero the display may be reset by selecting “reset tare” (
rst tr
).
Control Menu (
Contrl
)
The Control menu is used to control the 4-20 mA analog output and the relays manually, ignoring the
input. Each relay and analog output can be programmed independently for manual control. Selecting
automatic control sets all relays and analog output for automatic operation.
Setting Up the Password (
pass
)
The Password menu is used for programming three levels of security to prevent unauthorized changes to
the programmed parameter settings.
Pass 1: Allows use of function keys and digital inputs
Pass 2: Allows use of function keys, digital inputs and editing set/reset points
Pass 3: Restricts all programming, function keys, and digital inputs.
Protecting or Locking the Meter
Enter the Password menu and program a six-digit password.
For instructions on how to program numeric values see Setting Numeric Values , page 19.