background image

EN

© 2018 Carlisle Fluid Technologies,Inc.

All rights reserved.

Binks is part of Carlisle Fluid Technologies, a global leader in innovative finishing technologies.  For 
technical assistance or to locate an authorised distributor, contact one of our international sales and 
customer support locations below.

USA/Canada

Mexico

Brazil

www.devilbiss.com
[email protected]
Toll Free Tel: 1-888-992-4657
Toll Free Fax: 1-888-246-5732

WARRANTY POLICY

Binks products are covered by Carlisle Fluid Technologies one year materials and 
workmanship limited warranty.  The use of any parts or accessories, from a source other than 
Carlisle Fluid Technologies, will void all warranties.  For specific warranty information please 
contact the closest Carlisle Fluid Technologies location listed below.

Carlisle Fluid Technologies reserves the right to modify equipment specifications without prior notice. 

DeVilbiss®, Ransburg®, MS®, BGK®, and Binks® are registered trademarks of Carlisle Fluid 

Technologies, Inc.

www.carlisleft.com.mx
[email protected]
Tel: 011 52 55 5321 2300
Fax: 011 52 55 5310 4790

www.devilbiss.com.br
[email protected]
Tel: +55 11 5641 2776
Fax: +55 11 5641 1256

United Kingdom

France

Germany

www.carlisleft.eu
[email protected]
Tel: +44 (0)1202 571 111
Fax: +44 (0)1202 573 488

www.carlisleft.eu
[email protected]
Tel: +33(0)475 75 27 00
Fax: +33(0)475 75 27 59

www.carlisleft.eu
[email protected]
Tel: +49 (0) 6074 403 1
Fax: +49 (0) 6074 403 281

China

Japan

Australia

www.carlisleft.com.cn
[email protected]
Tel: +8621-3373 0108
Fax: +8621-3373 0308

www.ransburg.co.jp
[email protected]
Tel: 081 45 785 6421
Fax: 081 45 785 6517

www.carlisleft.com.au
[email protected]
Tel: +61 (0) 2 8525 7555
Fax: +61 (0) 2 8525 7575

SB-E-2-852 R2.0

20/20

www.carlisleft.com

Summary of Contents for EMG Series





















Reviews: