Instruction Manual
Page 2 of 40
Issue: 2.1
N:\Engineering\Manuals\Pump Unit E2-30 & 40 R2.1.doc
Note: Read and follow all instructions and safety precautions before using this equipment
Product Description
107071 – E2-30 Electric Pump
107093 – E2-40 Electric Pump
This equipment is designed for use with Solvent based and Waterborne materials.
Suitable for use in Zone 1 and 2, Protection Level:
II 2 G X
Manufacturer: -
Binks PCE
Justus-von-Liebig-Straße
31,
63128 Dietzenbach. DE
EU Declaration of Conformity
We: Binks declare that the above product conforms with the Provisions of Machinery
Directive 2006/42/EC and the ATEX Directive 94/9/EC by complying with the following
statutory documents and harmonized standards: -
Machinery Safety Standards EN ISO 12100, EN ISO 4413, EN ISO 4414 & EN12621
Explosion Prevention Potentially Explosive Atmospheres EN 1127-1
Non-electrical Equipment for Potentially Explosive Atmospheres BS EN 13463-1
Constructional Safety for Potentially Explosive Atmospheres EN 13463-5
Providing all conditions of safe use stated within the product manuals have been complied
with and that the final equipment into which this product is installed has been re-assessed
as required, in accordance with essential health and safety requirements of the above
standards, directives and statutory instruments and also installed in accordance with any
applicable local codes of practice.
H Beiersdorfer
(General Manager)
8
th
January 2010