10
www.bindicator.com
WRL180213 Rev. A
VII. MAINTENANCE
PREVENTATIVE MAINTENANCE
See ORB 4-20mA Input Box IOM for specific maintenance and possible replacement parts for the ORB 4-20mA
Input Box unit. There is no preventative maintenance for a single unit radio.
REPLACEMENT PARTS
LUC044016
Extended Range Antenna, 2 ft (61 cm) Connection Cable
LUC044023
Extended Range Antenna, 10 ft (3 m) Connection Cable
LUC044005
Extended Range Antenna Lightening Arrestor
VIII. TROUBLESHOOTING
For technical or service questions, please call the manufacturer Customer Support at 1-800-778-9242.
For detailed dimensional drawings, go to www.bindicator.com.
SYMPTOM
POSSIBLE CAUSE
CORRECTIVE ACTION
RSSI LEDs not on
Radio(s) are not powered on
Make sure the Indicator LED is red; if not
check wiring
Protocol switches do not match
Check dip switches and change if needed
Antenna not connected
Tighten antenna and put in most direct line
of sight to other radio
Red Indicator LED is not
on
Not wired correctly
Reference wiring diagrams and check
wiring
Top and or middle
Indicator LEDs is not
flashing
Both (all) radios may not be powered
on
Make sure the Indicator LED is red; if not
check wiring on both (all) units.
Units are not communicating
Check all wiring
