background image

 

BF (E1) 05/2016 

page 4/58 

 

Dear customer, 

For the correct operation of the chambers, it is important that you read this operating manual completely 

and carefully and observe all instructions as indicated. Failure to read, understand and follow the 

instructions may result in personal injury. It can also lead to damage to the chamber  and/or poor 

equipment performance. 
 

1. 

Safety 

This operating manual is part of the components of delivery. Always keep it handy for reference.  The 

device should only be operated by laboratory personnel especially trained for this purpose and familiar 

with all precautionary measures required for working in a laboratory. Observe the national regulations on 

minimum age of laboratory personnel. To avoid injuries and damage observe the safety instructions of the 

operating manual. 

 

 

WARNING 

Failure to observe the safety instructions. 
Serious injuries and chamber damage. 

  Observe the safety instructions in this operating manual 

  Carefully read the complete operating instructions of the chambers. 

 

1.1  Legal considerations 

This operating manual is for informational purposes only. It contains information for installing, start-up, 

operation and maintenance of the product. Note: the contents and the product described are subject to 

change without notice. 
Understanding and observing the instructions in this operating manual are prerequisites for hazard-free 

use and safety during operation and maintenance. In no event shall BINDER be held liable for any 

damages, direct or incidental arising out of or related to the use of this manual. 
This operating manual cannot cover all conceivable applications. If you would like additional information, 

or if special problems arise that are not sufficiently addressed in this manual, please ask your dealer or 

contact us directly by phone at the number located on page one of this manual 
Furthermore, we emphasize that the contents of this operating manual are not part of an earlier or existing 

agreement, description, or legal relationship, nor do they modify such a relationship. All obligations on the 

part of BINDER derive from the respective purchase contract, which also contains the entire and 

exclusively valid statement of warranty administration. The statements in this manual neither augment nor 

restrict the contractual warranty provisions.  
 

1.2  Structure of the safety instructions 

In this operating manual, the following safety definitions and symbols indicate dangerous situations 

following the harmonization of ISO 3864-2 and ANSI Z535.6. 

1.2.1  Signal word panel 

Depending on the probability of serious consequences, potential dangers are identified with a signal word, 

the corresponding safety color, and if appropriate, the safety alert symbol. 

 

DANGER

 

Indicates an imminently hazardous situation that, if not avoided, will result in death or serious (irreversible) 

injury. 

Summary of Contents for BF 115




























































Reviews: