Binder BF 115, Operating Manual

Page: 19 / 59

BF (E1) 05/2016 page 19/58
6. Press button to return to normal display / actual value display (automatically after approx. 30
seconds).
Adjust the temperature safety device following any changes of the set-point (chap. 7).
6.3 Time functions: Continuous operation and Timer operation
Press the time management button .
The timer indicates its current time function. There are two possible time functions:
Continuous operation
The display shows alternately “ t1 ” (time function) and the time function “Continuous operation” “ t inf ”:
The heating is permanently active, independent of the timer setting.
Timer operation
The display shows alternately “
t1
” (time function) and the running-down
time
or “
tOff
”:
or
Remaining time (example: 28 Min.) – Timer running
down
Heating activity depending on the entered time value and
the timer function selected in the user menu (chap.6.4.4)
Timer not programmed or run-down “t off”
If the timer has run-down, the chamber’s behavior depends
on the pre-selected timer function (chap. 6.4.4).
Press button to return to normal display (actual value display) (automatically after approx. 30
seconds).