Binder 9020-0366 Operating Manual Download Page 7

Page: 7 / 95

KBF-S / KBF-S-UL (E6) 11/2021

page 7/95

1.4.2 Safety alert symbol

Use of the safety alert symbol indicates a

risk of injury

Observe all measures that are marked with the safety alert symbol in order to avoid death or in-

jury.

1.4.3 Pictograms

Warning signs

Electrical hazard

Hot surface

Explosive atmosphere

Stability hazard

Lifting hazard

Scalding hazard

High humidity

Danger of frost

Risk of corrosion and /

or chemical burns

Harmful substances

Biohazard

Pollution Hazard

Mandatory action signs

Mandatory regulation

Read operating

instructions

Disconnect the power

plug

Lift with several persons

Lift with mechanical

assistance

Environment protection

Wear protective gloves

Wear safety goggles

Prohibition signs

Do NOT touch

Do NOT spray with

water

Do NOT climb

Information

to be observed in order to ensure optimum function of the product.

Summary of Contents for 9020-0366
































































































Search results

Summary of Contents for 9020-0366

Reviews:

Related manuals for 9020-0366

Brands by name

Popular brands

Binder 9020-0366, Operating Manual

Search results

Summary of Contents for 9020-0366

Reviews:

Related manuals for 9020-0366

Brands by name

Popular brands