Binder 9020-0146, Operating Manual

Page: 52 / 71

MK (E3) 07/2009 page 52/70
•
Exact location of the BINDER product
•
Contamination clearance certificate (chap. 19) via fax in advance
The authorization number needs to be applied to the packaging in such a way that it can be easily recog-
nized or be recorded clearly in the delivery documents.
For security reasons we cannot accept your delivery if it does not carry an authorization num-
ber.
16. Disposal
16.1 Disposal of the transport packing
Packing element Material Disposal
Straps to fix packing on pallet Plastic Plastic recycling
Non-wood (compressed match-
wood, IPPC standard) Wood recycling Wooden transport box (option)
with metal screws
Metal Metal recycling
Solid wood (IPPC standard) Wood recycling Pallet
with foamed plastic stuffing
PE foam Plastic recycling
Cardboard Paper recycling Transport box
with metal clamps
Metal Metal recycling
Edge protection Styropor
®
or PE foam Plastic recycling
Protection of doors and racks PE foam Plastic recycling
Bag for operating manual PE foil Plastic recycling
Insulating air cushion foil (packing
of optional accessories) PE foil Plastic recycling
If recycling is impossible, all packing parts can also be disposed of with normal waste.
16.2 Decommissioning
Switch off main switch (3). Disconnect the unit from the power supply.
When switching off the main switch ON / OFF (3), the stored parameters remain saved.
•
Temporal decommissioning: See indications for appropriate storage, chap. 3.3.
•
Final decommissioning: Dispose of the unit as described in chap. 16.3 to 16.5.
16.3 Disposal of the unit in the Federal Republic of Germany
According to directive 2002/96/EC of the European Parliament and of the Council on waste electrical and
electronic equipment (WEEE), BINDER devices are classified as “monitoring and control instruments”
(category 9) only intended for professional use“. They must not be disposed of at public collecting points.
The temperature test chamber for natural simulation MK bears the symbol for the marking
of electrical and electronic equipment manufactured / placed on the market in the EC after
13 August 2005 and be disposed of in separate collection according to the directive
2002/96/EC on waste electrical and electronic equipment (WEEE) and German national
law for electrical and electronic equipment (Elektro- und Elektronikgerätegesetz, ElektroG).
WEEE marking: crossed-out wheeled bin with solid bar under. A significant part of the ma-
terials must be recycled in order to protect the environment.