Binatone Vesta 1305 Call Blocker, User Manual

Page: 26 / 30

24
8.3.7 Choose the Information to be Displayed in Idle
You can choose to display time or handset name in your idle screen.
1. Press <MENU/OK> then <UP>/<DOWN> to show
HS SETTINGS .
2. Press <MENU/OK> then <UP>/<DOWN> to show HS DISPLAY .
3. Press <MENU/OK> then <UP>/<DOWN> to select HANDSET NAM E or TIME .
4. Press <MENU/OK> to con ¿ rm.
8.3.8 Set the Auto Answer
If you turn on the Auto Answer, you can answer a call automatically by just lifting the
handset off the base or charger, without having to press any key.
1. Press <MENU/OK> then <UP>/<DOWN> to show
HS SETTINGS .
2. Press <MENU/OK> then <UP>/<DOWN> to show AUTO ANSWER .
3. Press <MENU/OK> then <UP>/<DOWN> to turn ON or OFF the auto answer feature.
4. Press <MENU/OK> to con ¿ rm.
8.4 Base Settings
8.4.1 De-register a Handset
This operation should only be necessary if one of your handsets becomes faulty or lost
and needs to be replaced.
You will need to enter the 4-digit System PIN (Default PIN is 0000) in order to
de-register a handset from the base station. A de-registered handset will have the
antenna icon
À ashing and REGISTER on the display.
Note: You cannot de-register the handset that you are currently using.
1. Press <MENU/OK> then <UP>/<DOWN> to show BS SETTINGS .
2. Press <MENU/OK> to show DELETE HS .
3. Press <MENU/OK> and the display shows PIN?---- .
4. Enter the 4-digit system PIN .
5. Press <MENU/OK> and the ¿ rst handset number is displayed.
6. Press <UP>/<DOWN> to scroll through the list of registered handsets and select
the number of the handset you want to de-register.
7. Press <MENU/OK> to con ¿ rm, and the chosen handset will be de-registered.
8.4.2 Change the Flash (Recall) Time
You may need to change the recall ( À ash) time if your phone is connected to a private
exchange (PBX). The recall time options are SHORT (the default value of 100ms),
MEDIUM (300ms) or LONG (600ms).
1. Press <MENU/OK> then <UP>/<DOWN> to show BS SETTINGS .
2. Press <MENU/OK> then <UP>/<DOWN> to show FLASH TIME .
3. Press <MENU/OK> then <UP>/<DOWN> to select your desired flash time
( SHORT, MEDIUM, LONG - an asterisk indicates the current setting).
4. Press <MENU/OK> to con ¿ rm.
8.4.3 Change the System PIN Code
A 4-digit system PIN code is used to protect your phone against unauthorised use
when changing some system settings of the base station. The default system PIN
code is 0000.