46
7.7
Ringer
Setup
7.7.1 Change Ringer Melody
There are 10 base ringer melodies from 1 to 10, and you can set a different
1. Press <MENU/OK> and <UP/DOWN> to select
SETTINGS
2. Press <MENU/OK> to show
RING SETUP
.
3. Press <MENU/OK>and <UP/DOWN> to select
EXT RING
or
INT RING
4.
Press <MENU/OK> and the display will show
MELODY
. Then press
<MENU/OK> to show
MELODY 1
5.
Press <UP/DOWN> to scroll through the Melody list (from 1 to 10).
6. Press <MENU/OK> to confirm the setting.
Note:
The respective ringer melody will be played during your selection.
7.7.2 Change Ringer Volume
You can adjust the volume level of the ringer for internal calls (INT RING)
1.
Follow steps from 1 to 3 in section 7.7.1.
2. Press <MENU/OK> <UP/DOWN> to select
VOLUME
. Then press
<MENU/OK> and <UP/DOWN> to step through the volume level list Off,
3. Press <MENU/OK> to confirm the setting.
Note:
The respective ringer volume will be played during your selection.
If
VOLUME OFF
is selected, the <Ringer Off> icon will display.
.
.
.
1 to 5.
and external calls (EXT RING) separately, with settings from 1 (the quietest)
to 5 (loudest), or turn it OFF.
ringer melody for internal and external calls.
.
7.8
Set the Dial Mode
In Idle:
1. Press <MENU/OK> and <UP/DOWN> to select
SETTINGS
.
2. Press <MENU/OK> and <UP/DOWN> to select
DIAL MODE
.
3. Press <MENU/OK> and <UP/DOWN> to select
TONE
or
PULSE.
4. Press <MENU/OK> to confirm.
You should normally leave the dialling mode at its default setting of TONE
(also called DTMF) unless the phone is connected to an old exchange that
only recognises PULSE dialling.
