21
In idle, press and hold <M1>/<M2>/<M3> to dial the number pre-stored
A direct memory key, M1, M2 or M3 must be programmed with a number
before it can be used. Please see section 7.3.9 for details.
OR
Press <TALK>, and then press and hold <M1>/<M2>/<M3> to dial the
number pre-stored under the respective key.
- If no number is stored, you will hear a double beep tone.
Answer a Call
I
f the handset is not on a charging cradle:
When the phone rings, press <TALK> to answer the call, press it again to
If the handset is on a charging cradle and if AUTO ANS is set to ON:
when the phone rings, pick up the handset to answer the call
automatically, without having to press any button.
Audio Boost Feature
The audio boost feature allows you to amplify the handset earpiece
volume during a call. (Note: you can also adjust the earpiece frequency
4.3
Make a call from direct memory keys (M1-M3)
4.2
4.4
End a Call
During a call connection, press <TALK OFF> to end the call.
OR
Put the handset on a charging cradle to end the call.
4.5
Adjust Earpiece and Handsfree Volume
There are 5 levels (VOLUME 1 to VOLUME 5) to choose from for each of
the earpiece and handsfree volumes.
4.6
1. To turn on the audio boost feature, press <AMPLIFY> on the right side
of the handset, at any time during a call. The handset top indicator turns
2. When the audio boost is activated, press <VOL+ / VOL-> on the other
side of the handset to adjust the earpiece volume further.
3. To turn off the audio boost and return the earpiece volume to normal,
press <AMPLIFY>again and the handset top indicator light turns off.
The audio boost turns off automatically when the call is ended.
under the respective key.
turn on the speakerphone.
on and the display shows BOOST ON.
response if you have difficulty hearing callers. See section 7.3.3.)
During a call, press <VOL+ / VOL-> or <UP/DOWN> to select volume 1-5.
When you end the call, the setting will remain at the last selected level.
The current setting is shown.
