Binatone SI?2042 VS, Instruction Manual

Page: 6 / 34

6 66 66
button (8) (8) (8) (8) (8) to produce a directional strong burst of steam from
the sole plate. Push the button several times with 5–7 seconds
intervals until the article is fully refreshed.
!
If during the process your water tank (5) (5) (5) (5) (5) runs out of water,
disconnect the appliance from the mains outlet, wait till it cools
down, refill the tank and plug the appliance back into the
power supply and continue the process.
Spray
Using the water spray (7) (7)
(7) (7)
(7) will help when ironing details of the
article (cuffs, trimmings, plackets, etc) or clothes, which demand
“•” (low temperature) ironing, when steam ironing is not possible.
Push the button several times to moisten the material.
5. When you have finished cleaning or ironing, do not forget to
switch the iron off by putting the steam control knob (9) (9)
(9) (9)
(9) into
the “0” position, the temperature control knob (10) (10) (10) (10) (10) – into the
“Min” position and unplugging the appliance from the mains
supply outlet.
CARE AND MAINTENANCE
Cleaning of the sole plate
!
The scale on the sole plate can be removed
with a rough cotton cloth dampened with a
vinegar solution.
!
Do not use any abrasive substances and ma-
terials to clean the sole plate.
Storage
Before storing the iron, make sure it is disconnected from the
mains supply outlet and is completely cooled down. Set the tem-
perature control knob into the “Min” position and the steam control
knob into the “0” position. Drain the remaining water from the
tank (5) (5)
(5) (5)
(5) by opening the cover (4) (4)
(4) (4)
(4) and holding the iron upside
down over the sink. Store the appliance in the upright standing
position.
USEFUL TIPS
Selection of temperature settings
! Before ironing, we recommend that you orga-
nize your clothes, into the types of material and
the recommended temperature settings.
! We recommend that you start ironing, using the
lower temperature settings first: the appliance
gets hot quicker than it cools down.
!
When ironing articles made with combinations of fibers, start
with the temperature recommended for the most delicate mate-
rial first (for example, to iron a cloth made of cotton and polyes-
ter select the temperature recommended for ironing polyester
first).