5
Binatone Help Line - 0845 345 9677
Calls are charged at Local Call rate.
BE CAREFUL
to check that there are no pipes or electrical wires hidden in the
wall.
Fix two screws (not supplied) at the marked locations, leaving approximately
Hang the base unit on the screws using the wall mount slots.
You may need to remove the telephone from the wall and tighten the screws
the cradle with the
parking hook
on the cradle arranged to fit in the
parking recess
102
NOTE: For wall-mounting, the Parking Hook
If you have a Broadband line
If you connect your telephone to a line
otherwise you may get interference
with a broadband connection, you will
need to insert a micro-filter between
In a home with broadband, every telephone must have a micro-filter connected,
not just the one at the telephone point that your modem is connected to.
If you need more broadband micro-filters, contact your broadband supplier.
3. Wall Mount installation
Mark two points on the wall that are 102mm apart to lay the fixing centres as
the telephone and the telephone line,
between the telephone and the broadband, which could cause problems.
so that the base is securely fixed and does not wobble.
under the earpiece on the Handset.
7mm between the wall and the screw head.
Place the Handset on
shown below.
in the base must be slid out, turned 180
degrees and slid back in place.
