Direct Call
With Direct Call turned on, when you press any key
except the
PROG
button, the handset will automatically
make a call to a number you have programmed in. This
feature is sometimes called
babysitter’s call
.
!
With Direct Call turned on, it is not possible to make
emergency calls, unless you have programmed an
emergency number such as 999 as the Direct Call
number. But remember that the number you have
programmed will be dialled automatically when any
key is pressed.
Before you can turn Direct Call on, you must
program the telephone number.
1
Press the
PROG
button then
1 3
2
Key in the number
You can press the
HANG UP/C
button to clear
digits one by one; or press and hold the
HANG UP/C
button to clear the Direct Call
number completely.
3
Press the
PHONE/OK
button to confirm
To turn Direct Call on and off:
1
Press the
PROG
button then
1 2
2
Use the
or
buttons to set:
0
for Direct Call
off
1
for Direct Call
on
3
Press the
PHONE/OK
button to confirm
While Direct Call is turned on, the display shows and
the Direct Call number. You can answer calls as normal.
Customising your handset
26
To clear all
memories
This is a way of clearing all stored numbers at
once, from the memory locations and the Last
Number Redial memories. If you have set a
Direct Call number, it will be cleared too.
1
Press the
PROG
button then
1 9
2
Press the
PHONE/OK
button to confirm
Note: Caller ID memories are cleared by
resetting the base unit (see page 32).
To reset the
handset
When you reset the handset, you return all its settings
to their defaults, as follows:
■
ringer volume
7
■
ringer melody
4
■
key tone
on
■
Indirect Network
off (see page 33)
■
auto-answer
off
■
select base unit
automatic (best connection)
1
Press the
PROG
button then
1 0
2
Press the
PHONE/OK
button to confirm
Customising your handset
Binatone Help Line:
0845 345 9677
(Local Call rate)
27
E:\Binatone2004\Lifestyle\Lifestyle_100\Lifestyle-100_UK_01.vp
14 April 2004 15:14:08
Color profile: Generic CMYK printer profile
Composite Default screen
