Using a multi-handset system
“I can’t transfer
a call.”
Make sure the other handset is in range of the base unit.
Make sure you’re dialling the correct number for the
other handset (1 to 6, or
Ø
for all registered handsets).
The answering machine
“The machine
won’t record
messages.”
Make sure the answering machine is
switched on
.
The machine’s memory may be full.
Delete some
messages
to make room for new ones.
Check that
outgoing message OGM1
is selected; with
OGM2 selected, callers can’t leave messages.
“I can’t switch
the machine
on.”
The machine’s memory may be full
. Delete some or all
recorded messages (see page 3 ), then try again to
switch on.
“I can’t hear my
messages being
played back.”
Use the
á
or
â
button on the handset, to adjust the
volume in the earpiece or speakerphone.
“Remote
operation
doesn’t work.”
Make sure you’re using the correct
remote PIN
(page 4 ).
Check that you’re using a
tone-dialling phone
. Some
cordless or mobile phones don’t generate continuous
tones, so aren’t suitable for remote operation.
Batteries
“The handset‘s
batteries are
running low
within an
hour or two.”
Before you first used the handset, you should have left it
on the base unit or charger pod for
up to 15 hours
to
charge the batteries fully.
You may need to
replace the batteries
(see below).
Troubleshooting
65
E:\Binatone2006\iDECT_X1i\iDECT_X1i_UK_03.vp
12 June 2006 10:54:07
Color profile: Generic CMYK printer profile
Composite Default screen
7
2
