Binatone HR-24C, Instruction Manual

Page: 6 / 28

6
INSTRUCTION
MANUAL
1. Place the appliance on a dry smooth horizontal
surface.
2. Put all of the hair rollers
(3) on the heating ele-
ment (9). Place large diameter hair rollers near the
center and small diameter hair rollers – along the
edge.
3. Plug the power cord into a wall outlet, switch it
on by pressing button
(8) and close the lid (2).
When switching on the appliance the “On” indicator lights up (7).
4. Let the appliance heat up for approximately 10 minutes; while the
hair rollers are being heated the lid (2) should be closed.
5. When the hair rollers are heated the heat indicator (7) will change
color from red to transparent white. For each hair roller size there
is its own heat indicator.
6. Use the hair rollers only on dry or slightly damp hair. For better
hairstyle fixation you may use a hair gel or lotion before curling.
7. Choose the hair rollers of appropriate diameter depending on hair
length and curl size you want to get. To fix hair rollers tightly on
your hair, the hair lock length should not be less than hair roller
diameter, therefore curl the shortest locks with the smallest hair
rollers.
8. Separate a small hair lock and comb it. Wind the lock on the hair
roller (3) from hair tips to their roots. Fix the hair roller with hair-
pins (5), placing them at a small angle to the hairpin, as shown in
figure B . Note that for each hair roller (3) diameter there is its
own hairpin (5) size. Using the above procedure curl all of the
remaining hair. You may also use the crabs in order to fix hair
locks
(4).
9. Leave the hair rollers on your hair until complete cooling. If you
are curling damp hair, make sure that the hair is dry before re-
moving the hair rollers.
10.Carefully pull out the hairpins (5) or take off the crabs (4), and
remove the hair rollers (3). Let the hair cool down completely,
then style your hair as you wish. Do not comb your hair after curl-
ing; carefully arrange your hair using your fingers or a wide-tooth
comb. If needed, fix your hairstyle with a hair spray.
11.Always unplug the appliance immediately after use.
MAINTENANCE
AND CLEANING
1. Unplug the appliance and let it cool down com-
pletely.
2. To clean the appliance, just wipe with damp
cloth. Never immerse the appliance into water.
3. Always keep the heating element
(9) clean. Do
not let dust accumulate inside the appliance case.
If you have not used the appliance for a long time,
you should clean it before the next use.