45
7.10 Set
the
Key
Tone
In Idle:
1. Press <MENU/OK> and <UP/DOWN> to select
2. Press <MENU/OK> and <UP/DOWN> to select
KEY TONE.
3. Press <MENU/OK> and <UP/DOWN> to select
ON
or
OFF.
4. Press <MENU/OK> to confirm.
7.11 Set the Base Language
In Idle:
Press <MENU/OK> and <UP/DOWN> to select your desired language.
Press <MENU/OK> to confirm.
The Key Tone is a confirmation beep when you press any key. It is set on
by default, but can be turned off, if desired.
7.9
Set the Recall (Flash) Time
In Idle:
1. Press <MENU/OK> and <UP/DOWN> to select
SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select
FLASH TIME.
3. Press <MENU/OK> and <UP/DOWN> to select the desired flash time,
from SHORT, MEDIUM and LONG.
4. Press <MENU/OK> to confirm.
You may need to change the recall (flash) time if your phone is connected to
a PBX. The recall time options are SHORT (the default value of 100ms),
MEDIUM (300ms) or LONG (600ms).
Press <MENU/OK> and <UP/DOWN> to select
LANGUAGE.
7.12
1. Press <MENU/OK> and <UP/DOWN> to select
SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select
CHANGE PIN.
3. Press <MENU/OK> and display will show
“PIN?”
, enter the 4-digit PIN
4. The display will show
“NEW PIN”,
enter the new PIN and press
5. The display will show
“REPEAT”
, enter the new PIN again, and press
Note:
If the incorrect PIN is entered or the new PIN is not entered twice the
same, an error tone will be emitted and it will return to the previous menu.
<MENU/OK> to confirm.
(default setting is 0000) and press <MENU/OK>.
Change the System PIN
A 4-digit system PIN code is used for changing the system settings of the
base station, and is used to protect your phone from unauthorised use. The
default system PIN code is 0000.
<MENU/OK>.
If this takes a short time, press <C/MUTE> to return to the menu immediately.
SETTINGS.
1.
2.
3.