Binatone CEJ-1775, Instruction Manual

Page: 7 / 32

6
! Do not tilt the filled kettle backwards, since water can spill
through the steam vent. If this happens, the kettle should be
wiped before turning it on.
! Do not take the electric cord out of the socket during operation
of the appliance. You should first turn it off.
! After using the appliance let it cool for a few minutes. After
that you can boil water in it again.
DESCRIPTION
OF COMPONENTS
Fig. A:
1. Housing
2. Hinged lid
3. Lid opening button
4. Removable filter
5. Water level scale
6. On-off switch
7. Power indicator
8. Cord storage base
BEFORE USE
Remove all packing materials from appliance;
make sure that there are no foreign items in it.
Wash internal surface of kettle with warm soapy
water, rinse carefully and wipe dry. In case of
unusual odor fill the kettle up to a maximum
level with vinegar solution (1 element of 9 %
vinegar per 20 elements of water), let the kettle
soak for an hour. Then wash out the kettle with tap water, boil
water in the kettle and pour it out.
INSTRUCTIONS FOR USE
1. Place the kettle with power base on dry hori-
zontal surface.
2. Take the kettle off the base (8), open the lid
(2) by pushing the button (3) and fill the
kettle with water.
3. Make sure the water level stays between
the minimum and the maximum marks on
the water level scale (5) . Do not switch on an empty kettle.
4. Close the lid (2) and put the kettle on the base (8) .
5. Put the plug in the socket making sure that the mains supply
matches the voltage requirements indicated on the appliance.
6. Switch the kettle on by the on/off switch (6) . The indicator
light will go on showing that the water is being boiled.
7. The appliance will automatically turn off as soon as water boils.
You may also manually switch the kettle off before the boiling
process is complete using the on/off switch
(6) .