05
Helpline No. UK/Nor ther n Ir ela nd
Web Support
http://www.binatoneonline.com/
08453459677
0818762092
Each channel also has 83 digital codes to let you set up
a group of users for more secured private communication.
a.
Press the
MENU
button 3 times. The current DCS code
flashes on the LCD screen.
b.
Press the
UP
or
DOWN
button to select the desired DCS
code.
c.
Press the
PTT
button to confirm the DCS channel setting.
Transmitting and Receiving
The Action 1000
transmission is “one way-at-a-time.” While
you are speaking, you can not receive a transmission.
The Action 1000
is an open-license band. Always identify
yourself when transmitting on the same channel.
The unit is continuously in the Receive mode when the unit is turned
ON and not transmitting. When a signal is received on the current
channel, the “
RX
” icon will be displayed on the LCD Screen.
c.
Release the
PTT
button when you have finished
transmitting.
3.6 Monitor
a.
Press and hold the
MENU
and
DOWN
buttons at the
same time. the “
RX
” icon will be displayed on the LCD
Screen. Your Action 1000 will pick up signals on the current
channel, including background noise.
b.
Press the
MENU
button to stop the channel monitoring.
In VOX mode, the Action 1000 will transmit a signal only when it
r sounds around you. The unit
The level of VOX sensitivity is shown by a number on the LCD
Screen. At the highest level, the unit will pickup softer noises
(including background noise); at the lowest level, it will pick up
only quite loud noises.
a.
Press the
MEN
U button 4 times, the“
VOX
” icon will
be displayed and “OFF” flashes on the LCD Screen.
b.
Press the
UP
button to set the VOX sensitivity to
the required level (the maximum level is“ ”.) To deactivate
the VOX function, press the
DOWN
button until “OF”
appears on the LCD Screen.
3
c.
Press the
PTT
button to confirm your setting. “
VOX
” will
is activated by your voice or othe
3.4 Receiving
CS
Binatone Help Line - 0845 345 9677
appear on the LCD Screen as long as the VOX feature
is activated.
VOX operation is not recommended if the Action 1000 w
i
ll be used
in
a noisy or windy environment.
You can use the monitor feature to listen for weak
signals. On the currently set channel
3.5 Transmitting
(sending speech)
a.
Press and hold the
PTT
(push to talk) button to transmit
your voice.
T
he
“
TX
" icon will be displayed
on the
LCD Screen
and transmit LED lig
h
ts up.
b.
Hold
the
uni
t
in
a
vertical
position
with
the
MIC
(Microphone) 5 cm away from
your
mouth.
While holding
the PTT button, speak into the MIC (microphone) in
a normal tone of voice.
will transmit for a further 2 second
s
after if you stop talking.
