3 - English
Power indicator lamp: When the power is electrified, the lamp is
always bright and goes out when it is broken.
Digital tube indicator lamp
：
Short press "Digital switch / reset"
button, each digital tube value will add one (0-9-A-F cycle).
Port state indicator lamp: When the wire is connected, it is
always bright and goes out when it is broken
5.8G Bridge
Signal indicator:
Master AP:
Output power indicator lamp.
When the output power is between 3~9dbm
，
the SIG1 light lit,the
output power is between 10~16dbm,the SIG1-SIG2 lights lit,the
output power is between 20~22dbm,the SIG1-SIG3 lights lit,the
output power is at 23dbm and above,the SIG1 to SIG4 lights lit.
Subordinate AP:
Signal connection intensity indicator
Running flowing water light when connection fails.
When the connection is successful and the signal intensity in the
range of 0~-65dbm, the SIG1 to SIG4 lights lit,the signal intensity
in the -66~-75dbm, the SIG1 to SIG3 lights lit,the signal intensity
in -76~-85dbm, the SIG1 to SIG2 lights lit,the signal intensity in
the -85dnm and below, the SIG1 light lit.
Fast pairing of digital switch
One to one pairing method
1. Dial a bridge to "M" and another bridge to "S".
2. Short press "Dig SW/ Reset" button, each digital tube value will add
one (0-9-A-F cycle).
3. The paired bridge is set to the same value and can be paired
successfully.
One to multiple pairing method
1. Dial a bridge to "M" and the other bridge to "S".
2. Short press "Dig SW/ Reset" button, each digital tube value will add
one (0-9-A-F cycle).
3. The paired bridge is set to the same value and can be paired
successfully.
