BIMG Metvisa ESP, Instruction Manual, Page: 6 / 20

6
3. Installation
3.1 Equipment Layout
The connection to the mains and the arrangement for operation must be carried out by a
qualified professional. Check that the voltage of the eqiuipment matches the mains voltage.
• In the installation, it is essential to make this manual available to the professionals who will
do the same.
To ensure correct operation and safety, the machine must be positioned in an airy
environment and on a sufficiently wide, level, dry and stable support surface, away from heat sources
and water taps, and at a medium height of 80 cm. Install your appliance by leaving a distance of at
least 20 cm around it so that it has sufficient space for inspection, maintenance, cleaning and use.
ATTENTION!
The manufacturer shall not be liable for any direct or indirect damages caused by non-
compliance with these standards and other instructions presented in this manual.
3.2. Electrical connection
The equipment comes with a power cord to be plugged into an electrical outlet. If the power
cord is damaged, it must be replaced with a new one. The exchange must be made by the
manufacturer, authorized agent or a qualified person in order to avoid risk.