INTELLIPRESS
™
ELECTRIC BENCH TOP PRESS
User Manual
BIM-IEBTPM-1218 Rev 1 | For Technical Assistance: 800-442-4622
8
SECTION 1.2: INITIAL PARAMETER SETTING - JOG
Press operations are made simpler by first establishing Jog parameters. To configure the Jog parameters
follow the steps below:
•
From the Logged-in screen (Figure 5 pictured on page 7), select the Recipe Settings tab.
•
Select the Jog button located in the Task Bar section of the screen (Figure 6).
•
Press on the Jog Speed Value (0.00 in this case) and enter the jog speed values in units in mm/sec. A
maximum jog speed value of 50mm/sec is recommended.
»
Jog+ will extend the press ram DOWN.
»
Jog- will extend the press ram UP.
•
Press the Home icon located in the taskbar to return to the Logged in screen.
See Figure 6: Jog Speed Selection
JOG+ SPEED
JOG- SPEED
