Bimar VT14, Instruction Booklet

Page: 8 / 24

8/24
INSTRUCTIONS:
Before each use, verify that the unit is in good condition, the electric cord is not
damaged, if the power cord is damaged, it must be replaced by the manufacturer
or a competent qualified electrician or a person with similar qualifications, in order
to avoid any risk.
 Please put the appliance on a secure surface
(verify that the area around the surface is clean,
without dust).
 Make sure that the fan is switched off ( pos.0 ).
 The fan can be manually adjusted up and down
by the air grating and according to his inclination.
 You can use the fan in the computer USB port or
AC / DC adapter (not included); check that the
voltage values shown on the data plate
correspond to those of the AC/DC adaptor or PC,
in this case 5Vdc..
 Use with USB on your computer:
-
Plug the USB into the computer , take care to properly orient the plug into the
USB port.
-
Turn on the fan through the 0 / I switch on the back , in pos. "I".
-
To turn off the device , select the 0 / I switch to pos. "0" and remove the plug
from USB into the computer.
 Use with AC/DC adapter (NOT included):
-
Insert the USB plug into the adapter , make sure to correctly orient the plug
into the USB port , insert the pina of the adapter into the power outlet.
-
Turn on the fan through the 0 / I switch on the back , in pos. "I".
To turn off the device , select the 0 / I switch to pos. "0" and remove the plug from
the socket .
When not in use for long periods, remove the USB connector from adapteur
or from the computer.