15
ASSEMBLY
Caution:
-
The appliance may only be used if completely and correctly assembled, i.e. complete with
base, columns and anchor flanges.
-
before assembling the appliance, make sure it is disconnected from the power point
If in doubt, have it checked by professionally qualified personnel or ask them to assemble
it.
Follow these instructions for assembly (see figures).
1.
Place the radiant part on the ground on a
cloth or other soft surface. Insert the cord
into the upper column if it has not
previously been seated. Position the upper
column to the heating unit and fasten it
using the two M10x12 screws provided and
tighten it properly.
2.
Position the lower column on the base in the
centre, align the 4 holes of the column with
those of the base, insert 4 M6X30 screws, as
well as 4 M6 nuts at the bottom and tighten
properly.
3.
Position the middle column on the lower
column (assembled with the base) and turn
fully clockwise to lock.
